90° Turns
Cable Runway Vertical Bend
Creates a gradual bend for inside and outside bends
Cable Runway Horizontal 90º
Creates a gradual bend in the horizontal plane of Cable Runway. Designed for cabling in conformance with the minimum bend radius requirements (typically 4 times the cable diameter). Made of lightweight tubular steel to fit a standard Cable Runway.
Rapid Ship Cable Runway Kit
The 5′ (1524 mm) length of this cable runway is designed to meet UPS shipping requirements without additional charges.
Kit consist of:
• (2) 5′ sections of cable runway
• (1) Butt Splice Kit
• Also available in 18″ and 24″ widths
Universal Cable Runway
Support backbone and horizontal cables in the telecommunications or equipment rooms and cross-connects on racks or cabinets. A wide selection of supports splices and accessories are available.
Features:
• Constructed of rectangular steel tubing for strength and support
• 130 lb/ft maximum load with runway supported every five feet
• Meets ANSI/TIA/EIA installation guidelines
652 Series Snake Way Secured Pathway 45° Component
6″ x 6″ 45° component. Constructed from 16 GA galvanized steel, phosphate dipped and powder coated ANSI 61 grey inside and out. Custom colors are available upon request. The curved 12″
radius maintains proper bend radius for all cables especially control and fiber optics. Screwed covers are completely removable and permit total access necessary to lay cables without pulling. NEMA Type 1
652 Series Snake Way Secured Pathway 90° Component
6″ x 6″ 90° component. Constructed from 16 GA galvanized steel, phosphate dipped and powder coated ANSI 61 grey inside and out. Custom colors are available upon request. The curved 12″ radius maintains proper bend radius for all cables especially control and fiber optics. Screwed covers are completely removable and permit total access necessary to lay cables without pulling. NEMA Type 1
652 Series Snake Way Secured Pathway “T” Component
6″ x 6″ x 6″ “T” component. Constructed from 16 GA galvanized steel, phosphate dipped and powder coated ANSI 61 grey inside and out. Custom colors are available upon request. The curved 12″ radius maintains proper bend radius for all cables especially control and fiber optics. Screwed covers are completely removable and permit total access necessary to lay cables without pulling. NEMA Type 1
652 Series Snake Way Secured Pathway 4-Way Component
6″ x 6″ x 6″ x 6″ 4-way component. Constructed from 16 GA galvanized steel, phosphate dipped and powder coated ANSI 61 grey inside and out. Custom colors are available upon request. The curved 12″ radius maintains proper bend radius for all cables especially control and fiber optics. Screwed covers are completely removable and permit total access necessary to lay cables without pulling. NEMA Type 1
